How To Decorate A Shell

MATERIALS NEEDED:Sea shell,fabric color, fevicol/glue,rounded mirrors(small size), beads.





STEPS TO DECORATE A SHELL:

1.First take shell and clean it with water.

2.Now you paint it with any fabric color .

3.After painting dry it for some times.

4.Now take the round mirror and paste it on shell by using fevicol/glue.

5.After pasting dry it for some time.

6.Now you take beads and paste it around the mirror.

7.Now again dry it for some time.

TIP:Instead of mirrors you can also use kundans(round shape).While painting a shell you can also give shadings.

Sand Painting

MATERIALS NEEDED:Thick chart paper,any design,trace paper,various colors of Sand,3D-liner,fevicol/glue.




STEPS FOR SAND PAINTING:

1.First take the chart paper and trace the design.

2.After tracing the design apply fevicol to every part of design.

3.Now take the sand of a color and sprinkle it to a part where fevicol is applied.

4.Now make it dry for a minute.

5.After a minute reverse the paper so that excess sand will be removed & it will be sticked only where fevicol is applied.

6.Now continue the same process to fill all the colors for the design you have chosen.

7.Now take the 3D-liner and apply it to the out line part of the design.

8.Now dry it for 15 minutes.

9.Hence your sand painting is ready.

10.If any sand color is appearing dull you can use water colors to make it bright.

TIP:Instead of chart paper you can also use wood piece & also instead of glitter
You can use water colors for outlines of your design.

Hand Made Cap For Kids

MATERIALS NEEDED ARE: Handmade paper, scissors, fevicol/glue.

STEPS TO MAKE HANDMADE CAP:

1.First take handmade paper & then cut it in round shape.

2.Then the rounded shape paper should be folded & then cut it.

3.Now make it in cone shape by joining both ends.

4.Now you can decorate it by your choice.

5.Now make two small holes & tie a thread to both the holes.

6.Hence handmade cap is ready for kids.

TIP:Instead of handmade sheet you can also use chat paper.

Hand Made Bag

MATERIALS NEEDED:Handmade paper,Saturn ribbon,punch machine,fevicol/glue.







STEPS TO MAKE HANDMADE BAG:

1.First take the hand made sheet& cut some part of it in rectangular shape Of your own measurement of length & width.

2.Then fold the hand made paper in half part equally.

3.Now by using fevicol/glue paste two sides of the bag & leave the top open.

4.Now by using punch machine make holes on the open side.

5.Now you tie the Saturn ribbon to it.Hence your bag is ready.

TIP:While choosing handmade paper choose the designed paper so that there is no Need of decoration.

3D Mural Work

MATERIALS NEEDED:A Wood piece,any mould,marble chips,dental powder,fevicol/glue, fabric colors,paint brush.

STEPS TO MAKE 3-D MURAL WORK:

1. First take wood piece of any shape.

2. Then take the mould of your choice.These moulds will be available in market.

3. Then paste it on wood piece by using fevicol/glue.

4. Dry it for some time.Then paint the mould & dry it for sometime.

5. Now you take dental powder& mix it with 1spoon of fevicol,some amount of water.

6. Now you apply it around the mould.

7. After applying you can now paste marble chips & dry it for some time.

8. After completion of these process you can paint it by giving strokes.

9. Dental powder & marble chips are available in crafts shops.

10. Hence your 3-D mural work is ready.

TIP:Instead of dental powder you can also use fevicol/glue.While mixing dental Powder solution take 1 spoon of fevicol & necessary amount of water and stir it properly.

Paper Weight With stone

MATERIALS NEEDED:Rounded/oval shape stone,fabric/pearl color,Mirrors of square shape,tube beads,fevicol/glue.

STEPS TO MAKE PAPER WEIGHT:

1. Take a stone and paint it with fabric/pearl color.

2. After painting it dry it for some time.

3. Then paste the mirror in middle of the stone by using fevicol.

4. After that paste the tube beads around the mirror.

5. Hence your paper weight with stone is ready.

TIP:While doing paper weight better to choose soft stone/using sand paper make it soft.

Photo Frame With Paper

MATERIALS NEEDED:Hand made paper,news papers, fevicol/glue,Any photo,thread,fabric/pearl color, mirrors(round).

STEPS TO MAKE PHOTO FRAME:

1. First take hand made paper and cut it into rectangular shape.

2. Then take news paper & role it with the help of pencil.

3. While rolling use fevicol/glue to be stiff.

4. In the same way role some amount of papers.

5. Maximum papers should be rolled are 12.

6. Then paste the paper rolls on four sides of hand made paper.

7. Then dry it for some time.

8. Now you paint it with your favourite color.

9. After that decorate it by using mirrors.

10.Now you paste photo.

11.In order to hang it you should tie a thread.

12.Hence your photo frame is ready.

TIP:While pasting the news paper rolls first you have to paste any two sides& then the other two sides.

Pen Stand With Paper

MATERIALS NEEDED:News paper,card board,fabric color,fevicol/glue,3D-liner.

STEPS FOR MAKING PEN STAND:

1.First take a cardboard & cut it in round shape.

2.Take the news paper of some length and role it by using pencil.

3.While rolling with pencil you should apply fevicol/glue in the end to form a pipe.

4.In the same way role some papers required for your cardboard.

5.The papers which are rolled should be dry for at least 1hour.

6.Then start pasting the paper rolls on cardboard piece by using fevicol/glue.

7.Then dry it for a day.

8.Then take a fabric color & paint it.After painting dry it for 10-15minutes.

9.Now you can decorate your pen stand by using 3D-liner.

10.After decorating dry it for some time.

11.Hence your pen stand is ready.

TIP:By rolling papers use fevicol/glue & dry it properly.

BangleWith Seed Beads

MATERIALS NEEDED:Bangle(metal/ plastic),satin ribbon,seed beads ,fevicol/glue,plastic thread.







STEPS TO MAKE BANGLE:-

1.First take a bangle like metal/plastic which is available.

2.Then take the satin ribbon and role to the bangle by using fevicol/glue.

3.Then dry it for some time.

4.Now ping the seed beads to a length of plastic thread (click here to see seed beads after pinging)

5.After that role it to the bangle by using fevicol/glue.

6.Hence your bangle with seed beads is ready.

TIP:Take care while pinging the seed beads & also while rolling it to the bangle role it tightly.

Designing A Bangle

MATERIALS NEEDED: One bangle,satin ribbon, fevicol,mirrors(round),seed beads.

STEPS FOR MAKING BANGLE:

1.First take a bangle like metal or plastic bangle.

2.Then take the satin ribbon of your color.

3.Then role the ribbon to the bangle you have taken.

4.You have to role the ribbon by using fevicol/glue.

5.Then dry it for 10 minutes.

6.Then take the mirrors which are available in different sizes.

7.Then take the mirrors and by using fevicol paste it.

8.Dry it for 5 minutes.

9.Then you can add any color of seed beads around the mirror.

10.Hence your bangle will be ready.

TIP: While rolling ribbon to bangle role it tightly & make it to dry properly.